How to Unclog a Shower Drain

How to Unclog a Shower Drain

Use a Plunger
Plungers weren’t made just for toilets, they work well to unclog drains in your bathtub and shower as well. Remove the drain cover, place the plunger right over the drain and let the water run until the top of the plunger is submerged. Then pump it several times to see if that relieves the clog.

Use Boiling Water
If you’re not comfortable using chemicals to clear your drain, there are other options you can try.  Carefully pour boiling water down the drain to see if that assists in breaking up the clog. If that doesn’t work, try mixing 1/3 cup baking soda and 1/3 cup vinegar to clear up the clog.

Use Liquid Drain Cleaner
There are many available drain cleaners on the market that can help you remove a clog. Don’t be afraid to ask a professional for a recommendation on which may be the best for you.

Use a Snake
With the drain cover removed feed the snake slowly into your drain until you feel some resistance, then wind the snake to break up the debris. Once the snake clears the clog the debris should flow down the drain.

Call Order a Plumber 
If none of the methods prove successful, give Order a Plumber a call at (844) 458-8673. We have both the tools and expertise to find the cause and clear the drain.

Garden Hose Repair

Garden Hose Repair

The gardening season is upon us and homeowners everywhere are tending to flower beds, vegetable gardens and of course lawns. In today’s environment with an emphasis on water conservation, last thing you want is water leaking from a broken hose. If you have leaks in an existing hose, it’s better for the planet to repair before you replace.

Hose Repair 101

Hoses leak for all kinds of reasons. They could freeze and expand too far if left out over the winter, or decay if left in the hot sun for an extended period of time.  Fortunately, no matter why the hose gets broken, it’s a simple process to repair it. All you need is a hose repair kit and a few simple tools.

First identify where the hose is leaking and mark it with a sharpie. Then, turn off the hose and drain it by lifting it in the air from one end to the other, allowing all the water in the hose to escape. Then cut off the piece of hose where it was leaking, making sure your cuts are clean and perfectly straight.

Then slide the replacement end part from your hose repair kit into the end of the hose and make sure it’s snug and inserted in as far as it will go. The next step is to screw on the clamps from the repair kit, and then you’re ready to go. Make sure you give it a test make the repair is all set. If the seal is not holding, you may need to push the ends further into the hose or tighten the screws.

Also if your hose is leaking or spraying at the outdoor spigot, this means the rubber gasket inside has failed and is simply be replaced by purchasing a new gasket found at your local hardware store. It’s also a good idea to replace these gaskets on an annual basis to prevent leaking.

Remember to Call Order a Plumber

When plumbing problems are too big to handle on your own call us (844) 458-8673 to get a Free estimate.

5 Things Every Homeowner Should Know Before Buying a Hot Water Boiler

5 Things Every Homeowner Should Know Before Buying a Hot Water Boiler

There aren’t a lot of appliances that you’ll buy for your home that are expensive as a new hot water boiler.

Typically, you’ll spend between $1,500 and $3,500 on a new boiler — and then add on a few thousand dollars for installation.

Before you make this kind of investment, make sure you do your homework and know what you’re getting into with a new hot water boiler.

What Exactly Is a Hot Water Boiler and What Do I Need to Know?

A hot water boiler heats your home. It’s one of the most common heating systems (aside from a furnace), and they’re often found more often in older homes in the northeast or those in areas that have cold weather.

They heat water and then distribute the hot steam or the hot water to your home through pipes. Steam goes to the radiator and hot water flows to radiators or radiant heat systems. New boilers are extremely energy-efficient (even more so than a furnace). They get their fuel from natural gas, heating oil, electricity, or propane.

Here’s what you need to know before you buy.

1. Boilers Come in Three Types

The most common types of boilers are system boilers, combination boilers, and standard boilers.

System boilers keep hot water in high-pressure, sealed cylinders. It can be distributed to multiple taps within your home at the same time, meaning there is a minimal drop in water pressure if multiple faucets are running at the same time.

Combination boilers are best for apartments or small homes. They heat water on demand, so you get hot water immediately and without delay, but the supply is limited since there is no tank holding the water.

Standard boilers work best in buildings or larger residences. Standard boilers have a hot water tank that heats the pipes that run through it.

2. Boilers Are Condensing or Non-Condensing

Boilers are either condensing or non-condensing.

One that is condensing concentrates water vapor produced during the heating process. This “waste heat” is then used to preheat the cold water entering the boiler, making these very energy-efficient.

Non-condensing boilers operate at higher temperatures and the heat gets vented outside, rather than being used to preheat the water in the boiler. The non-condensing boilers are less energy efficient as well.

3. Boilers Are Sealed Combustion or Non-Sealed Combustion

Sealed combustion units are the better option, as they bring outside air into the burner and direct exhaust gases outside. Non-sealed combustion boilers bring the heated are in and then send it up the chimney, which wastes the energy used to heat the air.

Sealed combustion boilers also won’t release dangerous gases into your home, like non-sealed ones can.

4. Boilers Should Be Serviced Annually

You should have your boiler serviced by a professional annually, just as you would a furnace.

The technician should check the boilers and the upright and baseboard radiators. They can troubleshoot any problems as well as make sure everything is working efficiently.

5. Boilers Only Provide Heat

One important thing to remember is that boilers only provide heat. So if you live in an area that gets hot enough where you’d want to cool your home, you’ll need an air conditioning system as well.

The Bottom Line

Before making a purchase as large as a new hot water boiler, make sure you understand everything there is to know about boilers. This guide will get you started on the right track.

Give us a call today to see how we can help guide your decision. We’re also available for boiler installation and repair.

5 Questions to Ask Before You Hire a Plumber

5 Questions to Ask Before You Hire a Plumber

Water loss is a big reason to contact a plumber. The biggest cause for residential water loss is plumbing supply line failures followed by toilet failures.

And it gets expensive. After the deductible is paid, it costs an average of $4,400 for plumbing supply lines and $5,584 for toilet failures.

When a plumbing problem happens, it’s necessary to hire a plumber. But if you hire the wrong one, you may end up paying a lot of money for bad service.

If you’re looking for plumbing contractors, keep reading. We’re sharing with you five questions you should ask before you hire a plumber.

1. Before You Hire a Plumber Make Sure They’re Licensed

Most states require plumbers to acquire a license. That means the plumber has the education, training, and has passed a written exam to ensure she/he is competent.

Licensed plumbers are also required to continue their education in order to maintain their license. And, they must adhere to specific rules and regulations set by your state’s regulatory board.

Don’t Take the Risk on an Unlicensed Plumber

Hiring an unlicensed plumber may not just result in a huge mess and create a more dangerous situation for you, but if your state requires you to hire a licensed plumber and you don’t, you may be subject to fines.

2. Ask About Their Rates

Look for plumbers near me with free estimates. But stay away from free estimate plumbers who only provide estimates over the phone.

A reputable plumber will come to investigate the problem before providing an estimate. Do not pay them entirely before the work is done.

Instead, find one willing to offer you a flat rate so you know exactly how much everything will cost upfront.

3. Find out Whose Doing the Work

Some plumbers hire contractors. And some plumbers are apprentices or journeymen.

They are still learning how to become a master plumber. Make sure whoever is doing the work is a master plumber since they’ll have the most experience.

4. Bonding and Insurance

Ask a plumber if they are bonded and insured. Then ask to see proof.

This will ensure that if someone is injured or the repair job goes wrong, you’re not on the hook to pay to fix the damages. Reputable plumbers are bonded and insured to protect themselves and their clients.

5. Find out What Happens If Something Breaks

Before you sign a contract, make sure your plumber offers a guarantee or warranty along with their work. And don’t just take their word for it, get the guarantee or warranty in writing.

This will ensure that should something go wrong, you won’t have to pay for a plumber to fix the same problem more than once.

Order a Plumber Through Us

If you need to hire a plumber, think of us. We can handle everything and we’re available for emergency repair and services.

We can also help you repair any type of plumbing issue you can think of. Don’t wait when you have a plumbing problem, contact us today.

Toilet Not Flushing Properly? 3 Signs It’s Time to Call a Plumber.

Toilet Not Flushing Properly? 3 Signs It’s Time to Call a Plumber.

It’s a feeling everyone has experienced: You try to flush the toilet and nothing happens.

The key to surviving these moments is to know how to handle toilet issues without needing to call a plumber. After all, fixing a toilet isn’t rocket science.

This article takes a look at a few tips you should keep in mind the next time you encounter a toilet not flushing properly. Keep reading to discover some common toilet issues and how to fix them.

1. The Toilet is Clogged

Let’s start with the most common toilet problem people face. A toilet clog can happen for a number of reasons.

Perhaps someone used too much toilet paper or perhaps an object was dropped into the water and got flushed, but the obstruction was too large to go down. Now when you flush, the water level begins to rise and could overflow onto the floor.

The simplest fix for a clog is a plunger. Let the water level recede enough so that the agitation won’t cause it to splash over, and then use a flange plunger to plunge the clog for about 15 seconds.

Repeat a few times if necessary. Hopefully your effort will free the clog and the water will drain on its own. If it doesn’t, fill a bowl with hot water and pour it into the toilet. This should help to loosen the clog. But if the clog still doesn’t drain, use a snake to clear the blockage.

2. There’s a Problem with the Chain or the Flapper

If you try to flush but notice there’s no pressure on the chain, there could be a problem inside the tank.

Remove the lid and you should see a plastic flapper that covers a hole in the bottom of the tank. A chain connects the handle on the outside of the tank to the flapper, and the flapper lifts to let water flow when you flush.

When you push the handle but the toilet doesn’t flush, remove the lid to see if the chain has disconnected from either the handle of the flapper. If so, it’s an easy fix to simply reattach the chain.

It’s also possible that the flapper has become stuck in the open position, causing the tank to not refill with water.

If either the chain or flapper has broken, the kit will need to be replaced.

3. The Tank Doesn’t Have Enough Water

A weak flush could mean the tank doesn’t have enough water.

Remove the lid. Most manufacturers mark the inside of the tank with a fill line to specify the recommended water level.

If you discover that the water level is beneath this fill line, this is another easy fix. Most toilet tanks feature a small float connected to the fill valve. When the water level reaches this float, the valve will shut off the water automatically.

To adjust the height of the float, manually bend the float arm as much as needed. The water should now rise to the new fill level.

Troubleshooting a Toilet Not Flushing Properly

Nothing’s more frustrating than a toilet not flushing properly. It often happens at the most inconvenient times and needs to be fixed before it causes a mess.

Fortunately, there’s a simple solution most of the time. The tips in this article should help make troubleshooting your toilet a breeze!

Click here to learn how to detect a leaking pipe in your home.