7 Basic Plumbing Tools Every Homeowner Should Have

7 Basic Plumbing Tools Every Homeowner Should Have

Did you know that fixing easily corrected household water leaks can save homeowners about 10 percent on their water bills? Owning a home means having to face inevitable plumbing problems! Be prepared for any minor plumbing problem by having these basic plumbing tools.

1. Plunger

It may be the most obvious, but a plunger is an essential plumbing tool for every homeowner. Plungers are helpful when you have a clogged toilet, but did you know a plunger can be used for a clogged shower drain? A plunger is an inexpensive tool that will help you get out of some minor plumbing problems!

2. Drain Snake

Does your sink or shower not drain properly? The solution could be just a simple drain snake away. A drain snake, or plumber’s snake, is a flexible auger used to dislodge clogs in plumbing. A drain snake is a simple plumbing tool that will allow you to clear debris like hair and product buildup without damaging your pipes.

3. Wrenches

Adjustable wrenches are an essential tool in any home plumbing toolkit. There are two types of wrenches that are particularly helpful when it comes to dealing with common plumbing.

Pipe Wrench

A pipe wrench is a heavy-duty wrench that is good for gripping and turning pipes. Its adjustable jaws make it easy to use by gripping one way and sliding in the other.

Basin Wrench

A basin wrench is a wrench with a long handle and jaws at the end. It’s used to tighten and or remove the faucet and fill valve lock nuts. It can be very useful in a plumbing pinch!

4. Heavy-duty Rubber Gloves

When dealing with pipes and plumbing, rubber gloves can be an overlooked yet essential tool. Keep your hands, wrists, and forearms clean and protected from sharp objects by wearing rubber gloves when dealing with household plumbing issues.

5. Slip-joint Pliers

Have you lost a wedding ring down your kitchen sink drain? Slip-joint pliers can save the day. Slip-joint pliers are useful tools for both bending and gripping in tight plumbing situations. With two sets of teeth, slip-joint pliers are a versatile tool to keep on hand. They have the ability to grip small objects like nails or grab bulkier objects like bolts.

6. Thread Seal Tape

Thread seal tape is also known at PTFE tape, plumber’s tape, or Teflon tape. This tape is good for sealing pipe threads and other plumbing leak necessities.  If you have a leaky pipe, consider using thread seal tape to temporarily fix the leak to avoid further water damage. In some cases, thread seal tape can be used to solve the issue. Household leaks can not only cause damage and increase utility bills but also leads to water waste. The average family wastes 180 gallons per week from household leaks according to the EPA. Consider the thread seal tape in your plumbing toolbox a way to combat this problem.

7. Tape Measure

The last plumbing toolkit essential is a basic tape measure. When dealing with plumbing you’ll often need to take exact measurements to ensure correct repairs in tight spaces. A tape measure will help you avoid costly mistakes due to incorrect length or distance in your home repair.

Don’t Have These Basic Plumbing Tools?

If you have a plumbing problem and are without these 7 basic plumbing tools don’t worry. Contact us at Order A Plumber today for all your home plumbing needs.

Get the Best Flush: How to Choose the Best Toilet for Your Needs

Get the Best Flush: How to Choose the Best Toilet for Your Needs

Looking for the best toilet for your home? Not sure what your options are? While toilets may seem simple enough at first glance, the truth is that each toilet is unique. Toilets come in all shapes and sizes and have different features to suit a variety of needs and budgets. Getting a high-quality toilet from the beginning will help you avoid some of the most common toilet problems later on, so it’s worth considering your options thoroughly before making a buying decision. Luckily, we’re here to help. Below we’ll tell you how to choose the very best toilet for your needs.

1. Take Bathroom Measurements

The first thing you should think about when buying a toilet is its measurements. It’s important to take the measurements of your bathroom and ensure that you look for a toilet that will be a good fit. Most of all, you’ll want to get the rough-in measurement. The rough-in is the distance that is between the wall and your floor drain and usually ranges between 10 to 14 inches. Be sure that you find out what measurements you’re working with when choosing a toilet so that you don’t run into any problems later on.

2. Choose a Bowl Shape

One of the biggest choices to make when choosing a toilet is whether you want a toilet with a round or elongated bowl shape. Round bowls take up less space so can be a great choice if you have limited room available. On the other hand, elongated bowls provide an increased level of comfort. Be sure to measure your bathroom carefully to ensure you’ll have enough space for the bowl shape that you choose.

3. Consider the Style

You should also think about the style of any toilet you’re considering and determine how it fits with your overall bathroom aesthetic. You’ll want to choose between the different profiles including visible trap, concealed trap, and skirted toilets. You may also choose a different color for your toilet besides a standard white color. You’ll also want to decide if you want to get a one or two-piece toilet. A one-piece toilet will be more stylish and will take up less space. On the other hand, two-piece toilets are more common and will be more economical overall.

4. Determine Water Efficiency

Water efficiency is also important to think about when buying a new toilet. First of all, you’ll want to look at the flush rating to ensure you get a toilet that will work well and be resistant to clogging when flushing waste. Single-flush, dual-flush, pressure-assist, and power assist toilets each have different pros and cons depending on your needs. It’s a great idea to get a low-flow toilet that is eco-friendly and that uses less water. These toilets can be a good choice if you want to go green and want to spend less money on utility bills each month.

5. Check For Special Features

These days, many toilets come with special advanced features that can improve hygiene and provide added convenience. You’ll want to consider whether you have any special needs or if any of these features would be right for you. Buying a smart toilet can be a great choice and can offer extra benefits to your home bathroom. Some toilets will provide better hygiene by using warm water and some smart toilets will have air dryers and heated seats as well. If you have the money to spend, the benefits of smart toilets may be well worth the money you’ll spend on.

Deciding on the Best Toilet For Your Needs

If you’re looking for the best toilet on the market you need to consider the features above carefully. By spending some time thinking about each of the above points you’ll be sure to make a great choice for your home. Looking for residential or commercial plumbing services? Contact us today to learn more about what Order A Plumber can do for you.

5 Benefits of Natural Gas Boilers for Your Home

5 Benefits of Natural Gas Boilers for Your Home

How do you heat your hot water? You might not have thought about it much, but how you heat your water matters. It matters to the environment, your wallet, and to how conveniently and efficiently your heater works. Natural gas boilers are one of the best options out there for heating your hot water. In fact, natural gas accounts for 24% of all residential energy consumption. Let’s look at five reasons why natural gas is such a great fuel for heating your hot water.

1. A Clean Burn

For many homeowners, finding a good fuel that is also good for the environment is a key priority. Natural gas fits the bill. It is one of the cleanest burning fuels available. It doesn’t give off dirty omissions like coal and oil and the greenhouse gases it produces are minimal in comparison.

2. Saves Money

Do you like saving money? Consider a natural gas boiler when it’s time to replace your hot water heater. Natural gas is an inexpensive energy source. The price doesn’t fluctuate much like the price of oil and, in most areas, it is cheaper than electricity. Maintenance and other operating costs for the machine itself are also affordable when compared to heaters that run on other types of energy. In 2018, the U.S. withdrew over 100 billion cubic feet of gross natural gas per day. Natural gas overwhelmingly comes from domestic sources, which is helpful in reducing the U.S.’s dependence on foreign oil. This is also the reason why the price stays relatively low and stable.

3. Energy Efficient

In addition to being less expensive to start with, less natural gas is required to heat the same amount of water. The fuel efficiency rate of natural gas boilers is estimated to be about 90%. This helps keep your energy bills down even more and is even less damaging to the environment.

4. Dependable Hot Water

Power outages when you have an electric hot water tank mean no hot water. Oil shortages during peak times or due to market fluctuations can leave you without hot water as well. Natural gas gets to your home through an underground pipeline. This means that storms don’t disrupt natural gas service like they do electricity service. Even when the lights go out, you can still enjoy a hot shower.

5. Convenience

Natural gas is a very convenient source of energy. You don’t have to have a holding tank on your property and you don’t have to remember to call for refills. Simply hook into the pipeline and you’re all set. Another handy feature is that natural gas heats water faster than electricity does. No more waiting around for the hot water tank to heat up when you get back from the beach and everyone wants to take a shower at the same time.

Natural Gas Boilers for the Win!

As you can see, natural gas boilers are an excellent choice for heating your hot water. You can save money and feel good about making good choices for the environment at the same time. Are you looking to buy a natural gas boiler for your home? Still have questions? Contact us today! We’ll answer your questions and help you choose the right solution for your home.

Basement Floods Everytime It Rains? Here’s What to Do

Basement Floods Everytime It Rains? Here’s What to Do

Find Out Why Your Basement Floods Every Time it Rains

Water can come into your basement in several different ways. Before you can fix the problem, you need to know how the water gets into your basement.

Gutters filled with leaves and debris clog and send water down into the ground where cracks in the basement and foundation can lead to water getting into the basement.

If you’ve had consistent rain, then the ground is saturated and water pressure forces the water through the concrete into the basement.

Do you have windows in your basement? If they aren’t installed correctly, water can get in through there as well. No matter how the water gets into the basement, it can cause structural damage over time as well as problems with mold.

If you can’t find where the water comes into the basement, the contact a plumber and have them look for the source.

Waterproof Your Basement

Once you’ve discovered how the water gets into the basement, it’s time to find ways to stop it. If the water comes into the basement through cracks in the walls or foundation, then find a way to fill them.

There are do-it-yourself ways to manage the cracks in your basement walls, but having it done by a professional is the best route. They’ll be able to find all the cracks and have professional grade products to guarantee a good seal.

Cleaning your gutters is the best way to keep water from pooling and seeping into your basement. You can do it yourself but be safe. The gutters are on your roof, so be wary of falling.

Replace windows that leak and make sure there’s no way water can get in through them.

Don’t Forget Your Sump Pump

Almost every basement uses a sump pump to remove water that enters the basement. The sump pump sits in a hole and the grade of the basement flows all water to it. When the water reaches a certain level inside the hole, the pump activates and removes it from the basement.

If you notice the basement flooding suddenly, then the pump may be malfunctioning. If the ballast doesn’t work, then the pump may not turn on. If the connection to the outside pipes is clogged, the water can’t go anywhere.

Test your pump to make sure it works. If it does, then consider purchasing a higher power pump.

Take Care of Basement Flooding

Every time your basement floods, you risk not only property damage but dangerous mold growth. If your basement floods every time it rains, then find the source and take care of it.

If you want to learn more about basement flooding and other plumbing issues, then explore our site.

How to Unclog a Shower Drain

How to Unclog a Shower Drain

Use a Plunger
Plungers weren’t made just for toilets, they work well to unclog drains in your bathtub and shower as well. Remove the drain cover, place the plunger right over the drain and let the water run until the top of the plunger is submerged. Then pump it several times to see if that relieves the clog.

Use Boiling Water
If you’re not comfortable using chemicals to clear your drain, there are other options you can try.  Carefully pour boiling water down the drain to see if that assists in breaking up the clog. If that doesn’t work, try mixing 1/3 cup baking soda and 1/3 cup vinegar to clear up the clog.

Use Liquid Drain Cleaner
There are many available drain cleaners on the market that can help you remove a clog. Don’t be afraid to ask a professional for a recommendation on which may be the best for you.

Use a Snake
With the drain cover removed feed the snake slowly into your drain until you feel some resistance, then wind the snake to break up the debris. Once the snake clears the clog the debris should flow down the drain.

Call Order a Plumber 
If none of the methods prove successful, give Order a Plumber a call at (844) 458-8673. We have both the tools and expertise to find the cause and clear the drain.

Garden Hose Repair

Garden Hose Repair

The gardening season is upon us and homeowners everywhere are tending to flower beds, vegetable gardens and of course lawns. In today’s environment with an emphasis on water conservation, last thing you want is water leaking from a broken hose. If you have leaks in an existing hose, it’s better for the planet to repair before you replace.

Hose Repair 101

Hoses leak for all kinds of reasons. They could freeze and expand too far if left out over the winter, or decay if left in the hot sun for an extended period of time.  Fortunately, no matter why the hose gets broken, it’s a simple process to repair it. All you need is a hose repair kit and a few simple tools.

First identify where the hose is leaking and mark it with a sharpie. Then, turn off the hose and drain it by lifting it in the air from one end to the other, allowing all the water in the hose to escape. Then cut off the piece of hose where it was leaking, making sure your cuts are clean and perfectly straight.

Then slide the replacement end part from your hose repair kit into the end of the hose and make sure it’s snug and inserted in as far as it will go. The next step is to screw on the clamps from the repair kit, and then you’re ready to go. Make sure you give it a test make the repair is all set. If the seal is not holding, you may need to push the ends further into the hose or tighten the screws.

Also if your hose is leaking or spraying at the outdoor spigot, this means the rubber gasket inside has failed and is simply be replaced by purchasing a new gasket found at your local hardware store. It’s also a good idea to replace these gaskets on an annual basis to prevent leaking.

Remember to Call Order a Plumber

When plumbing problems are too big to handle on your own call us (844) 458-8673 to get a Free estimate.